There are times when users face the issue of Canon G6020 error code 5200. If you are dealing with the same issue then the best alternative available is to refill the cartridge. For this, start by checking the level of ink cartridge and refill it when it is low. Also, ensure to refill both the color and black cartridge to troubleshoot the Canon printer error completely. These are the steps that users need to follow to resolve the issue smoothly and then start printing printer easily.
top of page
When Canon error code 5200 occurs, you cannot print further. Hence, it is necessary to identify the reason behind the error and troubleshoot it. If you are facing the Canon Printer code 5200, and are looking for effective ways to resolve the issue, follow the various methods listed below and get started with your printer again:
1st Method: Resetting the Canon Printer
Here, you need to perform a printer reset by following the steps mentioned below:
Switch off your printer to start resolving the code 5200 Canon Printer.
Press and hold the stop button on the printer.
Press and hold the Power on button.
While you hold on the Power button, release the stop/reset button on the printer.
Press the stop/reset button twice while holding the Power button.
Wait until the printer displays an “idle message”.
Once you see the “idle” message, open the top cover of the printer to expose the ink cartridges.
Lift the cartridge cover holder and remove the Black and Color cartridges from the printer.
Place the cartridge holder back to its original position.
Replace the top cover of the printer to its initial position and switch on the printer.